CG1000 Parking / Access Control Gates

Access control systems and custom engineered solutions available!

CG2100-1  Gate Controller

Download as Adobe PDF

Description:

• CG1000 operates 10’ and 12’ gate arms
• Weatherproof and corrosion-resistant all steel cabinet
• Polished stainless steel mounting base
• NoTouch© proximity sensor prevents gate from striking pedestrians and vehicles
• 1/3 HP instant reversing motor
• Remotely programmable microprocessor controller (via RS-232/485 port)
• Multiple operation modes
• Gate operation counter built into software
• Resettable thermal overload motor protection
• Thermostatically controlled cabinet heater

Specifications*:

CG1000 Parking / Access Control  Gate

• Cabinet:
  14” x 15” x 40” 12 gauge steel with a 13” x 14” x 6.25” polished stainless steel base
• Door:
  Flush mounted with chrome lock assembly and a single internal gasket
• Paint:
  Textured powder coat with silicone base. Yellow or white are the standard colors. Additional color options are available.
• Motor:
  1/3 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
• Limit Switch:
  Controls gate travel so no brake device is required
• Heater:
  500 W thermostat controlled strip device
• Drive:
  Heavy duty, high cycle speed reducer with 50:1 output to the main shaft raises or lowers gate arm in two seconds.Shear/Spring Pin: Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

CG2100-1  Gate Controller

• Controller:
  Self-contained universal gate control device. Lane mode selection via RS-232 port on main CPU from laptop or desktop computer. 8 opto-isolated inputs, 4 opto-isolated outputs, 5 – 30V DC range wet or dry.
• Environment:
  -15°~149° F (-26°~65° C) with heater
• Input Power:
  115V AC, 50/60 Hz 220V AC optional feature
• Output Signal:
  12V DC, 1.5 Amps and 5V DC, 1 Amp
• Convenience Outlet:
  110V AC, 60 Hz, 15 Amps
• Service Switches:
  Three position switch to raise gate, lower gate, and normal operation mode, Power On/Off switch, Heater/Fan control switch
• Microprocessor:
  20 MHz PIC processor
• Vehicle Detection:
  PC board with one 11 pin amphenol connector for single or dual channel detectors

The CG2100-1 Gate Controller is housed inside the gate cabinet for protection. This controller unit may also be used to replace other manufacturers’ gate controls. Contact Cincinnati Gate Systems, Inc. with questions about this equipment and for information about options and accessories.

*Specifications subject to change without notice.

Proudly designed and
manufactured in Cincinnati, Ohio

top